Distributor in Denmark merges with Hans Buch
In 2016 our distributor in Denmark, G&O Trading, became part of Fritz Schur Technical Group, consisting of
Johs Thornam A/S, Hans Buch A/S, Fritz Schur Energy A/S and Fritz Schur Teknik A/S. The acquisition of G&O Trading ApS was a supplement to Fritz Schur Technical Group's organic growth as well as part of strengthening the group's technical expertise and product range in areas such as pumps, process engineering, leisure marine, railway and marine engineering.
As from April 1st 2017 G&O Trading has merged into into Hans Buch A/S and will continue being a major provider of high-profile products to support the development of sustainable solutions for the industry, marine and rail market. G&O Trading’s leisure marine segment will be merged into Johs Thornam A/S.
Managing Director of G&O Trading Mikkel Engsbro said: “We are happy that we can complete the merger, as our customers are seeking to consolidate their business with strong suppliers with both the technical, mercantile and financial position such as Hans Buch A/S and Johs Thornam A/S”. Mikkel Engsbro will continue as Division Director responsible for the Marine and Railway business. Managing Director of Hans Buch, Henriette Olsen remarked: “It has been an important factor for us that we have been able to retain the employees of G&O Trading as their expertise is key to our continued success. We have set very ambitious goals and will continue to develop our partners’ footprint in Denmark”.
Monitor Marine welcomes Neil Cramb
Hepworth Group would like to extend a very warm welcome to Neil Cramb who has been appointed to the Monitor Marine International division. Neil is from South Africa, and “grew up in Durban on the sunny shores of the Indian Ocean” as he puts it.
Neil has been involved in the marine industry since 2000, moving to Cape Town in 2006 to work with B Hepworth’s representatives, then more recently representing several well-known leisure brands in the marine industry in South Africa.
“I’m looking forward to working with the Monitor Marine brand to take their unique solutions into new applications” said Neil, continuing: “because I’m passionate about boats looking good, and because Monitor Marine’s magnificent engineering is probably the finest finishing touch a well-presented yacht could have, I think our solutions will be what sets the well-dressed yacht apart from the rest”.
We are glad that you have joined the team, Neil, and we look forward to working with you.
Danish offshore vessel provider Maersk Supply Service has shared a video of the newest addition to the company’s fleet – the recently delivered Maersk Master anchor handler.
Our US Distributor, In-Mar Systems supplied the wipers and controllers for this project.
The vessel is the first of six Starfish anchor handling tug supply (AHTS) vessels and its hull was launched at the Kleven shipyard in June of last year. According to Kleven Verft’s order list, the delivery of all five remaining Starfish vessels should happen during 2017.
The 95 meters long, 25 meters wide Maersk Master started its sea trials in February 2017, and can accommodate 52 people. The AHTS has a bollard pull of more than 250 tonnes and towing drums designed for 500 tonnes of pull force. Specs claim that the vessel has a 4,600 tonnes of deadweight capacity, and a deck capacity of 2,500 tonnes.
Hepworth has a handle on GRYPiT®
Hepworth Mouldings, a division of the Hepworth Group has entered into a long-term manufacturing partnership with Grypit Ltd, a Derbyshire based company who were looking for a new source of supply for their ergonomically designed gym equipment handles.
GRYPiT®’s development team have spent the last couple of years perfecting a selection of gym handles to suit every requirement of pulley systems. A world away from traditional steel bars and handles, the GRYPiT® robust, polymer moulded range reshapes thinking about role and function. The handle designs ensure that hands are correctly aligned in the ‘neutral’ position when training to help reduce risk of stress-induced conditions such as carpel tunnel syndrome, lessen likelihood of grip fatigue and promote improved performance.
Reaction Injection Moulding (RIM) in PU resin, Hepworth Mouldings utilised specialised tooling methods to manufacture the wide range of equipment handles in GRYPiT®’s range, which can be seen on their website.
Tom Dunkley, Technical Sales Manager at Hepworth Mouldings said “we undertook an intensive sampling process, perfecting both the moulding and finishing processes. The moulding aspect of the project is extremely technical and we could not have taken this on without our extremely experienced team. We are delighted to have been nominated by GRYPiT® as their long-term production supplier. The handles are a fantastic, revolutionary product and I'm sure they will take the fitness industry by storm"
After heavy investment in new equipment and experienced personnel, Hepworth Group has launched a new Mouldings Division, offering in-house RIM Moulding, complimenting their already extensive range of manufacturing services.
As many of Hepworth’s current customers have both resin and metalwork requirements, especially low volume and prototype work, the RIM Moulding facility now enables the company to offer an even broader range of services.
A flexible, cost efficient process for manufacturing polyurethane resin (PU) products, Reaction Injection Moulding (RIM) allows the use soft tooling, giving a significantly cheaper alternative to conventional injection moulding. The thickness of parts can be increased, with wall thicknesses of up to 25mm. RIM moulding can produce very large parts, up to 2000mm x 1000mm x1000mm in a wide range of materials including high impact, high temperature resistant and V0 rated (fire retardant) resins.
There are many advantages and benefits that RIM Moulding gives over injection moulding processes, which include:
- Short runs a speciality – from 1 to 1000 off
- Typical turnaround times of 2-3 weeks
- A wide range of rigid, semi-rigid, flexible, high impact and high temperature resistant resins
- The ability to produce dimensionally accurate mouldings and castings
- Product sizes varying from a matchbox weighing just a few grams, to a product the size of a car bumper weighing up to 15 kilos.
- Low cost tooling gives value for money compared to conventional injection moulding tooling; roughly a tenth of the cost in most cases!
- Easily modified tooling allows for design changes in product development
Free issue tooling is welcome.
Click here to go to the new website for this division; or for further information please click to email us.
Please click here for a copy of our RIM Moulding brochure.
It’s all change at Hepworth Group!
Peter Turnock, Sales Director for Monitor Marine International has retired this week.
We would like to thank him for all his hard work and dedication during his time with us and wish him all the best for his future.
We would also like to take this opportunity to introduce a new member to our team, Mr Neil Cramb, who is joining us as Sales Director. Over the next few weeks he will be making contact with customers and suppliers to introduce himself and arrange to come and visit as soon as is convenient.
Neil has a wealth of experience in the marine industry having worked with a number of marine original equipment manufacturers selling into the South African marine markets.
Neil can emailed by clicking here, or by telephone on +44 (0)1527 61243
End of year message
Another year is almost over and the Christmas holiday season is fast approaching. I think we
at Hepworth will all benefit from a hard-earned break as, fortunately, 2016 has been another busy year for us with many new projects and developments going on throughout our various divisions.
Highlights for 2016 include moving certification body to Bureau Veritas, who were able to offer a much-improved service to us with regards to our certification needs for IRIS and ISO. This move has been a very positive step.
Hepworth’s Emily Woodall was crowned the winner of the Made in the Midlands Women in Engineering, an award dedicated towards recognising the outstanding achievements of women who thrive within an industry that remains largely dominated by male figures. Hepworth Group was 'Commended' in the Manufacturing Achievement Award category. We are very proud of both these awards.
It has been a difficult year for the Marine Industry world-wide. One major change we have made this last year is that we are now working directly with shipyards in China and Spain. Necessary to enable us to become more competitive and improve technical support to our customers, this move has proved to be a very effective strategy, resulting in more orders from those countries.
We also developed and introduced a straight-line wiper with an extra heavy-duty arm capable of working with a 2 metre blade configuration. The quietest and most smooth-running wiper on the market, the redesign has made a significant impact on the wiper's price and cost of installation.
Looking to 2017, we are looking to increase our global network of Certified Service Stations, which have qualified engineers who have been trained by us. The following companies are qualified to install, commission and repair our wiper systems: Observator BV (Netherlands), Observator GmbH (Germany), Servi Ulsteinvik (Norway), JRC (Brazil), Nautic Solutions (Niteroi), AMI (Australia - 4 locations), Aquanautic (Singapore), Noah (Singapore) and Benson Marine (India -5 locations).
Monitor Marine launched a new range of low profile, high quality polished stainless steel Pull-Up Cleats and orders are increasing on a monthly basis as boat builders use them on their production lines. The comprehensive range of Helicopter Tie-Downs is gaining in market share too, now including three new models for over-deck installations and for flush mounting into concrete surfaces; this gives an increasing flexibility to the range of environments that they can be used in.
The Rail division has undertaken quite a few business trips to see both existing and potential new customers and, in doing so, have successfully turned many enquiries into orders. Sales for fleet retrofits, one of our target markets, has increased again from 2015 with a further increase predicted for 2017. Innotrans was a great show for us, with new build projects and more retrofit orders and enquiries being received. We are hoping for the same level of success at Railtex in 2017 and, with the addition of several members of staff strengthening the division including a Rail Technical Manager, we are looking forward to being able to give our customers faster design responses in the New Year.
For Fabrications, the highs of the year are securing continued business within the Rail UK market through the winning of a substantial contract on a platform vehicle. Staying on Rail, we have also been successful in winning 3 packages of work from a new UK customer; this has been a very difficult task as we do not fall in what they consider their ‘catchment area’ for suppliers. Now that we have our first purchase orders, we are hoping to build on our relationship to ensure that we are successful on future projects with them.
With our non-rail customers, it has been a mixed year and our focus for 2017 is to build up a more varied customer base.
The Automotive division has continued to push onto new areas, including the aftermarket and low volume production components supply. This expanding division had a very successful three days at the Automechanika Show, held back in June. Automotive exhibited a range of products including wiper systems, chassis/body parts and aftermarket accessories. Highlights of the event were visits from leading UK OEM's and discussions regarding new vehicle and motorbike designs, special editions and prototypes. Many new enquiries were received from both UK and overseas-based companies, in fact the event was so successful that we have already reserved a stand at next year’s event.
Hepworth’s Moulding division was introduced during the summer and has already seen several key contracts awarded, including moulded components for the Leisure, Motorsport, Automotive Prototype and Beverage industries. The moulding requirement for current contracts is expected to ramp up quickly from January onwards. 2017 is looking promising; there are further production projects on the cards, with supplier nominations taking place in the New Year - we are keeping our fingers crossed!
So on to 2017. We would like to thank all our customers, suppliers and staff for all their business and support during 2016, and wish you all a very Merry Christmas and a peaceful and prosperous New Year.
Tugboat Telstar fitted with 1800mm blades
The Tugboat Telstar has been equipped with Wynn Straight Line Wipers and
extra heavy duty 1800mm wiper blade configuration, supplied by our distributor Observator Vision.
The Telstar is operating on the Nordzee canal in the Netherlands.
Wynn wipers on most luxurious passenger liner ever!
The Seven Seas Explorer, subject of a recent Channel 5 TV documentary is a cruise ship built by Fincantieri of Italy for Regent Seven Seas Cruises. The vessel, which features 21 of our Wynn Type C Straight Line Wipers and 8000 Series Control System, was christened by Princess Charlene of Monaco on July 20th in Monte Carlo.
The 56,000-ton, 223m 750-passenger cruise ship is the first newbuild for Regent Seven Seas in 14 years and is what the company touts as the most luxurious vessel ever built, with 375 all-suite, all-balcony accommodations boasting the largest balconies at sea.
As the company’s publicity says “Seven Seas Explorer is spaciously intimate, breathlessly elegant and perfectly staffed, bringing elegance and glamour to the world’s greatest destinations, offering exquisite dining options that rival those of the finest restaurants ashore…”
Modern Railways' Golden Spanner Awards
The efforts of train maintenance teams, depots and rolling stock leasing companies were once again celebrated at the Golden Spanners Awards for train reliability on November 25th at The Grand Connaught Rooms, London.
The awards are for all those interested in railway rolling stock to meet to discuss best practice and celebrate excellence in train maintenance. It features a morning conference on rolling stock matters before lunch and then the awarding of the Spanners.
The Golden Spanners awards celebrate the best of rolling stock maintenance and are handed out to those companies making the greatest strides in train reliability, as measured by MTIN (Miles per Technical Incident). The awards are based on moving annual averages at Period 7 (four weeks ending mid October). Modern Railways Industry and Technology Editor Roger Ford has for many years assessed the reliability of the nation’s train fleets.
AWARD CATEGORIES: • Ex-British Rail DMU • New Generation DMU • Inter-city Train • Ex-British Rail EMU • New Generation EMU
Three awards are given in each category:
• Gold Spanner – most reliable train based on Miles per Technical Incident (MTIN)
• Silver Spanner – most improved fleet (percentage improvement in MTIN)
• Bronze Spanner – fastest incident recovery (based on primary delay per incident)
Hepworth Rail’s Alastair Timmis and Christine Hewitt were invited by Modern Railways’ Chris Shilling as Guests for the event and were very proud to find out that Hepworth’s wipers were on the majority of the winning vehicles and all of the new build categories.
Alastair Timmis stated: “We consider it to be a fantastic achievement for Hepworth to be on all of the new build vehicles in the EMU and DMU categories. Even though we of course didn’t win an award directly, our Wipers, which are a safety critical item, helped these vehicles win their awards for their reliability. It was great to meet up with current customers and potential clients and a really impressive show. I would like to thank Chris Shilling for his very kind invitation”
Automotive division success
Tom Dunkley attended the SMMT Open Forum at Cranmore Park, Shirley on the 1st November and also visited Advanced Engineering at the NEC, to engage with current suppliers, to meet new customers and see new composite and moulding emerging technologies.
The moulding contract that the Automotive division has is now well underway (Leisure industry products). We have also completed further contracts for automotive and motorsport products.
We have just supplied a wiper switch for the vehicle shown in the picture on the left; it’s a GT40 replica rather than the real thing though!
Fabrications Division's busiest month yet!
The month of October saw Hepworth Fabrications complete one of their busiest months. This has been due in part to our expansion into new markets such as the food processing industry, plus entry into the first delivery stages of the two national rail contracts that we have won.
The end of the month saw Luke Russell attending the Local Government Expo in London, where discussions were had about several large projects occurring in 2017 that would need high fabrication supplier involvement, for example: New Street Station Upgrades and Heathrow Terminal.
Overall Hepworth Fabrications is busier than ever and we wouldn’t have it any other way!
Key Account Manager appointed for Far East Rail clients
Ian Lockett has been tasked by the company to take charge of the key Rail accounts for China and Korea.
“With the rise in enquiries we are focused on giving the best possible service and support to deal with the demanding opportunities we are being provided. I will be the key contact for clients and plan to be travelling more to see them and offering help with ongoing and new business opportunities, whilst continuing to support all our other valuable clients.” Ian remarked.
Ian has been with the organisation for over 15 years and has extensive rail industry knowledge. He began as an Electrical Assembler before progressing on to be a Warranty Engineer, then a Service Engineer, followed by becoming Hepworth’s Rail After-sales Manager. Ian is now Technical Sales Manager and has gained a wealth of experience that he passes on - to the advantage of our customers!
Other news includes that the outcome of Innotrans is proving superb for Hepworth Rail. We have received an unforeseen amount of enquiries and we are delighted to say that many of them are progressing well. We have also visited several additional potential new clients regarding their enquiries and have high hopes of receiving their orders in the near future.
Monitor Marine launches modified Multi-Purpose Connector
In the last month, more export orders have been received for Helicopter Tie-Downs, all for installation to new build SuperYachts, one of which has two Helidecks.
A modified version of the 3 Tonne Flush-Fit Multi-Purpose Connector now includes a design that can be installed on Helipads and Helidecks where there is limited or no under-deck installation access. This version can be fully installed above deck, being fitted into a threaded backplate. This method increases the application areas for both the 3 Tonne and 1 Tonne models.
The new 2017 Product Guide (V7) is now available and on-line showing all the new product additions, together with revised loadings for Helicopter Tie-Downs; a result of design changes and Lloyds test results. Click here to view or download a copy.
Fuel tanks fabricated for luxury motor yachts
Hepworth Fabrications has just completed the delivery of 2 off Fuel Tanks and a Flybridge aluminium deckframe to one of the UK’s leading luxury Motor Yacht manufacturers.
Manufactured entirely in-house from aluminium, with a capacity of 1500 litres, these tanks are welded and pressure tested by Quality Control, before being signed off ready for despatch.
In the picture you can also see a 4 meter x 7 meter aluminium flybridge deck frame, again completely manufactured in-house by Hepworth’s Fabrications division.
Jonathan Eddy, Hepworth’s CEO said “We are very proud to be supplying high quality tanks and deck structures to the marine market”.
Hepworth win Made In The Midlands Awards!
Hepworth Group’s Emily Woodall was crowned the winner of the
Made in the Midlands Women in Engineering award on 20th October at IET Birmingham: Austin Court.
The award was sponsored by FBC Manby Bowdler, represented by Neil Lloyd.
After a fantastic ovation from local manufacturing directors and peers, Emily explained: “I’m over the moon, I was a bit shocked but it is a great achievement to have. The amount of women engineers out there is very minimal and I would love to see that increase, so if I could do anything to progress that, it would be a real honour.”
The Women in Engineering Award is dedicated towards recognising the outstanding achievements of women who thrive within an industry which remains largely dominated by male figures. The award continues to grow in popularity each year, as Threeway Pressings Ltd, Wrekin Sheetmetal, Yeoman Pressings Ltd and JSC Rotational were shortlisted this year for their high quality applications.
Initially, Emily developed systems for various vehicle designs initially using 2D CAD format before working with Hepworth’s team to get the 3D Solid Works system in place.
She then undertook additional training to ensure that Hepworth utilised the full capabilities of the new software, which gave them the edge over their competitors, as they could offer a complete design facility to customers.
Emily is now a Design Manager and she plays a pivotal role in looking at business growth and improvement projects at Hepworth. She also continues to support the innovation of the products that they supply into the market place.
Made in the Midlands CEO, Jason Pitt explained: “This year saw a growth in applications for our Women in Engineering category. It is crystal clear that Midlands manufacturers stand together as passionate advocates for the continual and future success of women in engineering. I would like to congratulate Emily for her great achievements at Hepworth.”
Hepworth International also were 'Commended' in the Manufacturing Achievement Award 2016. The award was sponsored by Birmingham City University, represented by Natalie Lewis, and was presented to Hepworth Automotive's Tom Dunkley.
Unmanned Warrior sports Hepworth wipers
The video available (from the link on the image to the left) comes from Atlas Elektronik UK,
which has been working with the Royal Navy and Northrop Grumman to demonstrate its unmanned high-speed mine hunting system at Unmanned Warrior 2016. Their vessel has been fitted with Hepworth’s 30Nm wiper motors with CT23 Control system.
In line with the Strategic Defence and Security Review direction on innovation and defence exports, the RN has invited industry, academia and certain Defence partners, including the US Navy, to safely experiment and demonstrate the potential offered by maritime autonomous systems within the Joint Warrior operational environment.
Major defence firms and small businesses alike are heading north to take part in Unmanned Warrior 2016 where they will show off their ideas for the future of autonomous systems at sea.
Lieutenant Commander Clive Langmead writes: “In Scotland QinetiQ, as part of its long term partnership agreement with MoD have prepared the flying and underwater ranges which it runs in Benbecula, Stornoway, Applecross and the Kyle of Lochalsh, including erecting hangars and laying a dummy mine field for the robots to try and find. Several RN Mine Hunters will also be trying to do the same. So this will be a very direct test of new systems against old. The Mine Hunters already use remotely piloted submarines in their work, but Unmanned Warrior is hoping to show things can be taken a stage further. The RN extended the invitation and 40 demonstrators have agreed to come and show off their ideas of the future of autonomy at sea. The guest list of distinguished visitors is large and the systems are some of the best, if not the best, in the world”. Click here for the full story.
Rail and Fabrications divisions exhibitions a success!
The Rail division's presence at Innotrans, held in Berlin
was a great success. The stand was the best it’s ever been judging by the many compliments we received from visitors who loved the way it looked.
There was enough product for them to look at and even play with, like the working wiper display stands, the design of which were compared to the iphone and thought to be very classy.
The Rail team received many enquiries from both new and existing customers; the majority of whom had planned to come and see us on our stand. We are already in the process of discussing many of the new projects that we were approached about and are very confident about building on our successful working relationships with customers both old and new.
September also saw the Hepworth Fabrications team attend the Northern Manufacturing Show, which is one of the largest production manufacturing shows in the UK.
At the show the team met with existing customers to discuss ongoing projects and also a great many potential customers wishing to discuss our new and improved capabilities. Overall the show was a great success as we continue to discover new markets.
Monitor Marine at Monaco Yacht Show
Monitor Marine had a presence on the British Marine exhibition stand at the recent prestigious Monaco Yacht Show.
Johanna Sargeant, International Development Execurive for British Marine said: "The pavilion/stand had a fantastic buzz throughtout the show and our stand was always busy. Our networking reception was also extremely well attended with around 150 people present. Overall a great success".
We recently made the decision to move certification body as LRQA our previous certification body had been struggling to find us auditors to meet the varied scope of work we manufacture. Bureau Veritas were able to offer a much improved service to us with regards to our certification needs for IRIS and ISO and so this move has been a very positive step.
Moving from Lloyds to Bureau Veritas was a very smooth process and their up-front customer service was very good. Once the contracts were agreed the Audit was swiftly booked and the 4 day transition and routine surveillance audit began on the 25th July this year.
To be able to trade in all of our markets worldwide both the ISO and IRIS certification are a must, have but they also ensure that we can manage all elements of our business in an effective way and promote continual improvement throughout.
We had a 4 day audit week commencing the 25th July which went very well. The Bureau Veritas Auditors provided much more useful feedback on improvements we could make to all areas of the business, and we improved our IRIS scope from 65% to 69%.
It is our increased scope that make the continuation of our certification more complex. In Fabrication for example we make products for Rail which have to meet stringent standards then we also make litter bins. We have recently been approved to manufacture fuel tanks and have had to go through a detailed manufacture and test process to receive our type approval. This, coupled with the wiper side of our business and Monitor Marine also in our scope of approval, demonstrates the variety of manufacture we have to include in our certification. Next year we will be adding our plastic division to the scope as well. Please click here for a copy of our ISO Certificate, and click here for a copy of our IRIS Certificate.
Rail road trip to Korea and China
Ian Lockett made a recent road trip to Korea and China to see existing customers for new projects and overhauls.
Ian said “This is Yedong NVR Tech based in Korea. They are our agent out there and they have been successfully awarding us contracts for many years. The visit was to show support to our customer and discuss any future business opportunities.”
The road trip was a great success and underlines Hepworth’s belief that 'face to face' meetings are crucial for both the customer and supplier alike, ensuring good personal and business relationships are not been lost in this age of electronic communications. Hepworth cares about its customers and, wishing to build upon their relationships, plan to continue these road trips in the future.
Hepworth Marine B140 blade replaced with upgraded B160 blade
The Hepworth B140 articulated blade is obsolete as of this month and has been replaced by the B160 articulated blade.
The new blade is manufactured in stainless steel, (rather than mild steel as previously used) and powder coated black. The item is the same in fit, form and function. B140 articulated blades for non-marine applications will still be available. If you have any questions, please do not hesitate to contact a member of the team.
Wynn Type D Wipers on Coastguard Tower
Originally received in 2014, the enquiry was for a basic pantograph system but the customer opted to go with the Wynn straight-line solution.
We have since received several other enquiries from customers due to the success of this project.
Monitor Marine at Monaco Yacht Show
Hepworth Group will be showcasing the Monitor Marine product range at the prestigious Monaco Yacht Show which is to be held on 28th September – 1st October 2016. We will be located in the Superyacht UK Pavilion.
Over the past six months, Monitor Marine’s Design Engineering Team has been involved in a number of new and exciting developments that will bring additional products to their current range of high quality, precision engineered stainless steel marine fittings. The Load Tests carried out recently at Lloyds British on Monitor’s range of Pull-Up Cleats were very successful, with better than expected results. On all four sizes from 120mm up to 320mm in length, the maximum Working Load calculated figures were exceeded by at least 25% in all directional loads. Not only will these cleats take higher loadings than other competitive designs, they are also low profile, require very little maintenance and are easily installed on to any type of deck structure.
Our designers are currently finalising a smaller version of the successful 1 Tonne Multi-Purpose Connector, as well as a new type of 50mm Hatch Handle.
Designed to match existing MMI highly aesthetic designs of the 50mm, 70mm, 80mm and 100mm handles, the new products will add to an already very superb quality “suite” of furniture for all new builds or re-fits.
Vine Trust Medical Ship MV Forth Hope request assistance
Hepworth was recently contacted by Vine Trust requesting support for a project by supplying window wiper parts requirement (control units, arms, and blades) for their first ever 34 metre new build ship which is nearing first stage completion at Albion Dockyard Bristol.
Since 2001 Vine Trust has been developing health services on the Peruvian Amazon and since 2014 on Lake Victoria Tanzania through utilising three ex Royal Navy Fleet tenders that were converted thanks to the support of BAE Systems Govan and BAE Systems Submarines in Barrow. Since the introduction of these vessels they have grown their annual provision to just over 160,000 patients per year which is expected to grow towards 250,000 once MV Forth Hope is brought in to service in the summer of 2017. Since inception, their projects have now treated over 1.3million patients with a free health service and over the next 25 years MV Forth Hope alone will benefit over 2 million patients.
As part of the vessels build they will be welcoming our Patron HRH The Princess Royal to Rosyth on the 20th of July to see the outfitting under way.
Hepworth is proud to be able to help with such a worthwhile project, and Rev Willie McPherson, Chief Executive of Vine Trust said: “On behalf of the Trust many thanks for your kindness. We have been humbled by the kindness of so many businesses in support of this project which over the next 25 years will enable MV Forth Hope to treat somewhere in the region of 2 million patients with a free health service in South America”.
Automotive division's success at Automechanika 2016
Hepworth Automotive had a very successful three days at the recent Automechanika Show, which was held at the NEC, Birmingham, UK. The Automotive division was exhibiting a range of products including wiper systems, chassis/body parts and aftermarket accessories.
Highlights of the event were visits from leading UK OEM's and discussions regarding new vehicle and motorbike designs, Special Editions and prototypes. Many new enquiries were received and we are currently putting together and sending out quotations to both UK and overseas-based companies.
The event was so successful that Hepworth International have already reserved a stand at next year’s event.
Monitor’s Pull-up Cleats, Connectors and Helicopter Tie-Downs proving a big hit!
The first order for the Monitor Marine Pull-Up Cleats has been delivered and installed on a new RIB. The customer was very pleased with the ease of installation, low profile and overall good aesthetics, and we have been told that they will now be fitting these cleats to all new builds. We have also just received confirmation of our largest order to date for the 4-Bar Helicopter Tie-Downs, from one of the world’s largest SuperYacht builders, with 45 units ordered.
A lot of enquiries are being quoted for, including one for over 300 Multi-Purpose Connectors for installations in the Middle East to anchor Skypool covers for a large area, plus sales are being made of both the 1 Tonne and 3 Tonne Connectors to an increasing number of Tender and Toy suppliers.
After a successful visit the OTC Exhibition in Houston, further meetings have now been arranged with some of the leading manufacturers of Helidecks and Helipads where the use of our wide range of Tie-Downs are the most comprehensive designs available, and a large offshore supply company based in Houston will be marketing our commercial range of Tie-Downs in South America, having already secured a significant contract with one of the world’s largest oil & gas producers.
Monitor Marine will be attending the forthcoming SuperYachts – Meet the Buyer in Italy, 15-18th June.
New Flugga boat design features Hepworth wiper systems
An exciting new boat that Flugga is developing will be fitted with the Hepworth’s 20Nm wiper system. Designed to withstand the harshest sea conditions that surround the British Isles, Flugga Boats utilise plastic and aluminium materials to give strength, low maintenance and a long-life hull, thereby delivering an extremely low total cost of ownership over the life of the boats. Flugga specialises in police boats, dive boats and rigid-hulled inflatable boats that are used throughout the world, all built in Shetland.
Hepworth Divisions are out and about…
For the first time, AUTOMECHANIKA is being held in the UK this year, from 7th to 9th June at the NEC, Birmingham. We will be exhibiting some of our latest automotive products on Stand No. 11 L 40 where the technical design and engineering team will be able to discuss our high quality production capabilities.
We will also be attending the SMMT Open Forum and SMMT meet the buyer which are being held at the exhibition.
Hepworth Automotive’s Technical Sales Manager, Tom Dunkley, attended the London Motor Show earlier this month which has made a welcome return to the capital after too long an absence. The all-new annual event attracted over 25,000 visitors, hosted 130 new car models from more than 40 brands and saw some of the UK’s best known dealer groups talking to prospective customers. Opened by patron HRH Prince Michael of Kent and held at the Battersea Park Evolution Centre, the show was a resounding success appealing to a broad demographic, with a good cross section of dealers from niche specialists and regional family groups to some of the biggest names in the Motor Trader Top 200.
Tom Dunkley stated: “This was the first Motor Show held in the UK since 2008, held in the idyllic surrounds of Battersea Park, London. It was great to see so many British manufactures under one roof. The stands were full of exciting new models and outlined the strength of British Design and Manufacturing. The plans to continue the show annually are a great start to having a show that competes with the world’s established Motor shows.”
For the first time Hepworth Fabrications will be exhibiting at Subcon 2016 held at the NEC, Birmingham, during 7-9th June 2016. Please visit us on Stand: H42, Qimtek Pavilion.
The Rail Division will be exhibiting at Rail Live on 22nd - 23rd June 2016 at Quinton Rail Technology Centre, Station Road, Long Marston. We will be located in the Rail Alliance Membership Marquee Stand No A11.
Hepworth Marine will be exhibiting at Seawork International, to be held at the Mayflower Park, Southampton, UK from 14th – 16th June 2016, and will be welcoming buyers from around the world.
Harmony Of The Seas fitted with Wynn Straight Line Wipers!
The world's largest cruise ship, Harmony of the Seas, is fitted with Wynn Straight Line wiper systems.
The gargantuan cruise ship, dubbed a floating city, arrived in Southampton in the middle of May, ahead of its first passenger trips.
Weighing in at 227,000 tonnes, the 16-deck 362 metre long vessel, which cost £700 million and is larger than the Eiffel Tower, can take more than 6,000 passengers and has 23 swimming pools.
The vessel also boasts:
• 2,500 state rooms
• 20 restaurants
• Central Park – a living park in the centre of the ship with more 10,000 plants and 50 trees
• 24 lifts for guests
• The Ultimate Abyss – the tallest slide at sea, plunging visitors 10 stories from deck 16 to deck 6
• The deepest pool at sea
• A double-story Wonderland specialty restaurant
• 11,252 works of art
• Robot bartenders
• Virtual balconies with real-time views of the destination for interior rooms
• 2,100 crew members from 77 different nationalities
image courtesy of www.cruisecritic.co.uk
Superyacht Eclipse fitted with Monitor Marine helicopter tie-downs
The Superyacht Eclipse, recently arrived in Gibraltar, is fitted with Monitor Marine’s flush fitting 4-Bar helicopter tie-downs.
For a couple of years the 162.5m Eclipse, built by German shipyard Blohm & Voss GmbH, held the title of the world's longest superyacht. The enormous yacht accommodates 36 guests and can carry up to 100 crew members. Some of Eclipse’s most impressive features include a massive 200m² swim platform, a large pool on the main aft deck and two helicopter landing pads. Click here for further information and pictures.
YouTube video of Hepworth wipers fitted to MotorYacht
Motor Yacht Dragonfly was dispatched to Vanuatu to provide disaster relief after Cyclone Pam struck the remote islands on March 14th 2015. The video is intended to show the work that the vessel and her crew performed and highlight the possible use of resources onboard yachts in such disaster zones. Click here to view the video.
HSSV for Oman's Royal Navy fitted with Hepworth's wiper systems
Take a look at the unique, 72m High Speed Support Vessel that is redefining naval capability by clicking here.
It shows footage of the Austal Australia designed and constructed 72 metre High Speed Support Vessel (HSSV) during sea trials off the Western Australia coast, March 2016. Two HSSV's have been constructed for the Royal Navy of Oman and are on schedule for delivery in 2016. Our agent AMI in Australia supplied type 80NM wiper systems for the Navy project.
Super Cruisers fit Wynn Wiper Systems
Hepworth’s wiper systems are being fitted to many of the new and very fabulous cruise liners, including:
• The Carnival Vista, which features 35 Type C Wynn Straight Line windscreen wipers with 8000 Series Control System and two Clear View screens
• Holland America's new ship the Koningsdam, fitted with 23 Type C Wynn Straight Line wipers with 8000 Series Control System and two Clear View screens
• Harmony of the Seas, the world's largest luxury cruise ship, which is fitted with 18 Type C Wynn Straight Line wipers and 8000 Series Control System. Stood on its end it would be 50m (164ft) taller than the Eiffel Tower and is almost 100m (328ft) longer than the Titanic!
For more information please download our newsletter by clicking here.
Monitor Marine going from strength to strength!
Production orders for the Monitor Marine Superyacht range of products are still on an upward trend, with orders for Helicopter Tie-Downs increasing month-on-month, including recent contracts received from Superyacht builders in Australia and Italy. The recently launched range of Multi-Purpose Connectors adapted for awning and bimini supports have found wide appeal; there are orders flowing in from builders all over the world, but especially from Holland and Scandinavia.
In the weeks to come, the Monitor Marine range will be shown to International Buyers at the British Marine Superyacht UK Tour of Excellence event in Portsmouth (20th April) and, as demand is increasing for Helicopter Tie-Downs from the Offshore Industries, the comprehensive range of commercial tie-downs will be shown at the forthcoming Offshore Technology Conference (OTC) and Trade Show, Houston, Texas, from 2nd May to 5th May.
Rail Social Event
A team from Hepworth are looking forward to attending Rail Sport, an annual event that brings together the rail community for a weekend of fun and networking. Leasing companies such as Angel Trains and Porterbrook, plus lots of the Train operators such as Virgin Trains, East Coast, etc. will be at the event. It also caters for rolling stock manufacturers such as Bombardier, Alstom and suppliers of items into the rail industry. We look at this event as a great opportunity to meet with our colleagues throughout the industry whilst having a jam-packed weekend of fun!
It runs from Sat 11th - Sun 12th June, held at Stanley Park, Blackpool, FY3 9HU. If you are attending the event, we look forward to seeing you there!
Fabrication and Automotive exhibitions
Hepworth Fabrications will be exhibiting at Subcon Expo-UK for the first time, a manufacturing supply chain show that is dedicated to subcontracting and outsourced engineering services.
Also, for the very first time, AUTOMECHANIKA is being held in the UK this year. Hepworth International will be exhibiting some of their latest automotive products on Stand No. 11 L 40 where their technical design and
engineering team will be able to discuss their high quality production capabilities.
Both exhibitions are held from 7th - 9th June 2016 at the National Exhibition Centre (NEC) in Birmingham, United Kingdom.
Hepworth Rail is happy to introduce the new Filler Spout Assembly (2101-WASH) into our product range. The new filler spout, manufactured in 316 stainless steel, has been precision designed and engineered in order to prevent the commonly occurring damage to standard caps that happens during the filling procedure in today’s environment.
Broken cap chains, damaged hinges and missing caps are some of the issues which have long-term cost implications and these can now be prevented; the simple push and pull hinge handle makes the cap simple to use and prevents the need for cap chains and screw caps which can be easily damaged. The spout can be used for diesel, toilets, waste, wash fluid and water applications.
As well as being highly durable, the overall streamlined look and satin finish helps to give a classy appearance to the vehicle. For further information on the cap please contact one of the Rail Team who will be happy to discuss the product and pricing.
• Unlatches and opens in one smooth movement
• Handle is disconnected when locked.
• 316 stainless steel and black acetal sleeve construction
• Acetal sleeve accepts 38mm, 50mm
For many years Hepworth’s Automotive division has been designing and manufacturing products for specialist automotive customers, including prototype assemblies as well as bespoke wiper systems. One such project involved developing a linear windscreen wiper for a proposed City Car, and another project that we were involved with included heavy duty systems for Military and Municipal vehicles.
Having recently invested in over £1m of new plant and equipment, including a state of the art, high capacity laser cutter, Hepworth is already working with a number of Tier 1 and 2 suppliers, fabricating a range of products including metal components, enclosures and electrical assemblies.
To increase their presence and help growth in this important market segment, Hepworth International would like to extend a warm welcome to Tom Dunkley, who has been appointed Technical Sales Manager and will be heading up this division, to be based at Hepworth’s Redditch factories. Tom has many years of experience working with the main OEM’s both here and in Europe, particularly in the automotive after-market, and on rally cars and rapid prototype projects.
Recent major activity has centred on finalising the design, development and manufacture of new additions to the product range including a new Mini Pad Eye and the low profile, stainless steel range of Pull-Up Cleats.
The new cleat range is manufactured in marine grade 316, mirror polished stainless steel and offers 120mm up to 320mm base lengths, and will eventually include a 400mm size.
Order of the month was for twelve commercial T45C Helicopter Tie-Downs to be installed on an oil platform off the coast of South America. Scheduled orders for our UK boat builder accounts are all ahead of forecast, with orders and deliveries for fittings being increased and/or brought forward.
The newly installed laser is producing very high quality SuperYacht finished stainless steel lettering in a range of sizes for installation on tenders and yachts. The first order is being delivered to Scorpion Ribs who supply the Land Rover BAR Americas Cup Team chase boats.
For those in peril: The stomach-lurching moment ship's crew faced terrifying 100-foot wave during North Sea storm.
Hepworth’s Wynn Straight-line wipers star in this terrifying piece of filming, taken by a man standing on the bridge of the ship on January 29. It just goes to show how good and efficient our wipers are when confronted with a bit of rain and some ocean spray…however watching the video may make you feel that you wouldn’t have wanted such an outstandingly clear view of events!
The intense video shows a ship stranded in North Sea about 100 miles from land as powerful waves crash into an ERRV (Emergency Response & Rescue Vessel); the job of the workers on board is to look after the oil platforms and the people who work on them.
The dramatic footage captures exactly what it was like to be on board a ship being battered by strong waves as Storm Gertrude caused chaos across Britain last month. The clip shows powerful waves - some estimated to be around 100-foot high - crashing against the vessel, brutally rocking it from side to side and soaking the entire deck. The boat can be heard creaking under the weight of the storm as it brutally rocks from side to side in the choppy water.
Monitor Marine launches two new finishes...
We now offer two additional finishes to our range of products - a beautifully smooth Satin finish Stainless Steel, and also Powder Coating in a wide variety of colours.
Please contact us for more information.
B. Hepworth proudly announces the introduction of the newly designed, extra heavy-duty, straight line wiper.
The quietest and most smooth-running wiper on the market using blades up to 2000mm in length, the redesign has made a significant impact on the wiper's price and cost of installation.
The video shows the wiper running in the standard 1.2 m/s speed. The wiper complies with the ISO standard 17899.
Additions to range -
Monitor Marine launches new products
Monitor Marine International are proud to announce the recent additions to their range of SuperYacht products.
The additions to the range include: Pull-Up Cleats in a variety of sizes from 120 to 440mm, a 50mm range of Finger Pulls and SnapShuts, a 70mm Deck Drain and a 70mm Mini Pad Eye for use with straps/webbing, a new range of probes for the 1 tonne multi-purpose connector, including fittings for awnings, bikinis, stanchions, ladders and tie-downs, a stainless steel Deck Housing for 4-Bar Helicopter Tie-Down?, and a "don't leave port without it" Maintenance Kit for routine maintenance and general upkeep of all Monitor Marine lock types and Multi-Purpose Plug-In Connectors.
Monitor Marine also now are able to offer two additional finishes to their products: satin stainless steel, and powder coating in a variety of colours. Please contact us for more information or click here to go to the Monitor Marine website.
End of Year Message from Jonathan Eddy, CEO
Once again the holiday season is approaching and with it, the end of another year.
2015 has been a year of substantial change and development, at the end of which we are still aiming to accomplish improved results, with a priority to exceed our customer’s needs and expectations.
July saw the acquisition of Monitor Marine International, a highly strategic transaction and an excellent acquisition which complements our existing Marine product range, offering the opportunity to expand our presence and product range into the superyacht and bespoke tender markets.
With over £1 million of investment in new plant and equipment during this year alone, the company continues to grow its product base and technical abilities.
The Rail department has seen the addition of several new team members to help with the exciting developments and growth of this expanding sector, with key members of the team now regularly out on the road meeting face to face with customers, attending key trade shows and networking events.
Hepworth was awarded Best Newcomer to RailTex in the second quarter of the year, as well as being presented with the Manufacturing Achievement Award at the Made in the Midlands ceremony in October. I am also proud to be able to announce that we won our category in the Manufacturer MX Awards for Supply Chain Excellence, reflecting external commendations for Hepworth continued improvement.
The Fabrications division is currently the fastest growing part of the business, with an increasing customer base. The division has penetrated a number of new markets, offering superb quality and service, whilst improving processes, capacity and capabilities as a result of implementing strategic investment in this sector of the organisation.
Within Hepworth, we have launched a number of new strategies and we will monitor and improve these throughout 2016, ensuring that we put the customer at the heart of everything we do, showing our customers how we can support their needs by providing sound technical advice where needed, flexibility where possible and a large range of specialised products and services.
I would like to take this opportunity to extend my personal gratitude to the whole of the Hepworth team for their hard work and dedication to this company, without which we would not achieve the successes we have. It is of real value to both myself and to all of our customers.
Every New Year is a fresh beginning with great ambitions and a fitting time to refresh commitments. Hepworth International look forward to a successful and prosperous 2016.
Jonathan Eddy CEO
New Trumpf Trulaser coming on line
Hepworth Group accepted delivery of the 5000 Series Trumpf CO2 laser late in November, giving more capacity and increased levels of service for the Fabrications division.
The new plant, an investment of £3/4m for the company, will be operating early December, with the ability to cut Stainless Steel up to 30mm thick, Aluminium up to 20mm thick and Mild Steel 25mm thick.
Success at the 2015 Marine Equipment Trade Show
Hepworth Group recently exhibited at the METS exhibition during 17 - 19th November 2015 which was held in Amsterdam RAI.
Over the course of the three days, more than 21,000 international marine industry professionals attended the world’s largest trade exhibition of equipment, materials and systems for the international marine leisure industry. “We look forward to this exhibition year on year” said Jonathan Eddy, CEO. “The 2015 show was a complete success with the majority of visitors to the Hepworth stand looking to buy products or planning to buy in the future”.
Hepworth International showcased their range of high quality, precision engineered stainless steel deck hardware as well as its range of Marine wiper systems, associated controllers and wash equipment.
Monitor Marine orders still grow...
Monitor Marine orders for both SuperYacht and Tender installations continue to grow as do new customer accounts as a direct result of an active worldwide marketing program.
After successful Boat Shows earlier this year, we are also experiencing higher production volume from our schedule order boat-builders.
As part of the Hepworth strategy, new products are now being added to both the Deckware and Cabin range and include a smaller (50mm) SnapShut and Finger Pull, a Mini Pad Eye – Strap type, 1 Tonne Connectors with awning attachments, 70mm Deck Drains with either standard or bespoke logo grills as well as “satin” or powder coated finished range of Hatch Handles.
Customers can now order a “suite” of fittings from 50mm, 70mm, 80mm and 100mm diameter which all have the same theme for on deck or interior lockers and hatches.
All these new additions to the range were shown at a very successful METS Trade Show in Amsterdam and were very well received with customers already placing orders as a result.
Hepworth wins award for Supply Chain Excellence
Hepworth Group has been recognised for its supply chain excellence at The Manufacturer MX Awards 2015. The company was Highly Commended in the Supply Chain Excellence category during a recent gala dinner and reception at the ICC in Birmingham.
Back in 2010, Hepworth removed a bespoke solution in favour of a company-wide SAP Business One solution. This provided the company with clear and accurate analysis of its inventory, enabling it to successfully manage and forecast demand and make significant savings on third-party reporting, plus improvements in its supply chain management.
Mark Wise, Managing Director at B Hepworth, said the accolade reflected the hard work of the team at the performance wiper system specialists. “We are delighted and very proud to receive an award at this year’s MX Awards ceremony, especially in such prestigious company,” he said, before continuing “it is a great boost to the team to get recognition for the business improvements we have made and the successful projects undertaken in true collaboration with our supply chain partners and our customers. We are looking forward to building on this success and generating new initiatives that we can showcase as exemplars of great British manufacturing in the future.”
As part of winning the accolade, Hepworth had to go through three rounds of judging. After submitting their initial application, judges then visited Hepworth’s factory in Worcestershire before a final round of judging in front of industry experts.
Pictured are Craig Bagnall, Finance Director (left) and Mark Wise, Managing Director (right) proudly holding their awards.
Hepworth achieves 2015 Made In The Midlands Award
We are pleased to announce that Hepworth were presented with the Manufacturing Achievement Award at the Made in the Midlands ceremony held at the Austin Centre in Birmingham on the 29th October.
The award was presented by Professor Kevin Morley, one of the stalwarts of manufacturing and of the Birmingham area, to Peter Turnock, Sales Director who commented “We have a highly skilled team of designers and engineers with a well trained workforce, coupled with significant investment in plant and equipment which allows us to increase our very diverse worldwide customer base with exports now representing 75% of sales.”
Monitor Marine manufacturing moves to Redditch!
Manufacture of all Monitor Marine products is now in full swing at our Hepworth site in Redditch, England in accordance with ISO9001:2008 Quality Standards and without any delays to customer delivery schedules.
The recently introduced 1 Tonne SWL Multi-Purpose Plug-In Connector has been tested by Lloyds British and the 5:1 load strength factor was exceeded, when only the shackle gave way at over 6.5 tonnes loading!! There was no damage to the Connector.
There are numerous applications for the Monitor Flush-Fit Connectors, apart from being used as lift points for tenders etc. A light aircraft manufacturer in the USA has ordered three 1 Tonne Connectors which will be fitted to the underside of the wings and nose. Having little or no windage in flight, they will safely anchor the parked plane in all weather conditions.
There will be a number new product developments being exhibited at the METS Show in November and will include a 75mm diameter range of deck drains which can be supplied with bespoke logo designs. Orders have already been placed for the newly launched Monitor Maintenance Kit which will service all lock assemblies and Connectors.
Hepworth on Awards Shortlist for the Manufacturer MX Awards 2015
The innovative, the efficient and the all-round epitome of excellence in UK manufacturing will vie to be crowned the best in their field
at The Manufacturer MX (TMMX) Awards 2015, sponsored by NatWest.
Announced on 13th August, the shortlisted businesses from all 12 categories will now undergo the most rigorous judging process of any industry awards in the UK. B Hepworth has been shortlisted in the Supply Chain Excellence Category.
The TMMX Awards 2015 will not only shine a spotlight on the absolute best businesses in industry, but provide feedback for each shortlisted entrant to help with future business improvements.
Nick Hussey, CEO of Hennik Group, publishers of The Manufacturer magazine and organisers of the awards said: “It is an incredible achievement to have been shortlisted – these are the largest and most rigorously judged awards in the sector so any company being shortlisted will have provided evidence to the judges of a superior level of understanding of what makes modern UK manufacturing so vibrant and competitive. Manufacturing is very much alive and well and the shortlisted companies are exemplars of what advanced manufacturing looks like in terms of sustainability, innovation and world class competitiveness”.
Companies shortlisted in 8 of this year’s categories will now begin the process of the judging team visiting their factories for assessment before an intensive Judging Day brings together all finalists for face-to-face presentations to the panel on October 14. The winners will be crowned at The ICC, Birmingham on November 26, where more than 1,000 industry leaders will come together for a night of reward, recognition and celebration.
New addition to Monitor Marine range!
Hepworth Group who recently acquired Monitor Marine International, has developed a new, lightweight, 1 tonne SWL Multi-Purpose Plug-In Connector which is being offered alongside the well proven, designed and patented 3 tonne SWL version.
Like the larger version, the smaller connector uses the unique system of a flush fitting, deck mounted anchor point and a short probe connector, which can be quickly inserted for many applications ranging from tender launching and recovery, to temporary or permanent stanchion anchor supports, bimini mounting points and awning fixing points. There are also many other applications where these connectors can be used, such as Marina pontoons and shore side installations.
Manufactured from 316 and 17-4ph high quality, polished stainless steel and requiring little maintenance, these connectors will be first choice for both tender builders and volume boat builders where a flush fitting, quick plug-in and lightweight designed connector will be the deciding factor. Weighing only 325 grams and with a flange diameter of 35mm, this easily installed, unobtrusive, aesthetically attractive, flush fitting connector is the ultimate solution for lifting, securing and tie-down points.
Hepworth International Rail Department contact changes
We are restructuring employee positions within the organisation, which will result in some changes in points of contact.
This will affect the following employees and will become effective from the 1st September 2015.
Ian Lockett – Rail Technical Sales Manager
Ian will be responsible for project management of all overhauls and retrofit projects as well as supporting new sales development.
Alastair Timmis – Rail Account Manager
Alastair will be responsible for the project management of existing projects and new sales enquiries. He will also be responsible for new sales development.
Alison Rennison – Rail Sales Administrator
Alison will be responsible for supporting the day to day project management for new and existing projects.
Adam Lockett – Aftersales Technical Support
Adam will be responsible for all aftersales issues. He will also be responsible for site visits relating to service work, first fits and warranty issues.
Sebastian Matuszyk – Warranty Engineer
Sebastian will be responsible for our warranty returns and service department. He will manage all returns, carry out investigations and provide technical reports on all returned items.
Rob Fallon – Warranty Assistant
Rob will be responsible for supporting the day to day operation of the warranty returns and service department.
For further information, please contact us by emailing firstname.lastname@example.org
B. HEPWORTH & CO LTD announce the recent acquisition of Monitor Marine International,
a privately owned company established 30 years ago to develop and manufacture a wide range of high quality, precision engineered stainless steel marine deckware and interior fittings for Super Yacht and Quality Volume Boat Builders.
The products were developed utilising innovative designs and combine durability, aesthetics and a superb mirror-polish finish.
“We are pleased to announce this highly strategic transaction and are excited to welcome the Monitor Marine team to Hepworth”, said Hepworth’s CEO Jonathan Eddy. “Monitor Marine is an excellent acquisition and complements our existing marine product portfolio, offering the opportunity to expand our presence and product range in this very important market sector.”
These products are the ultimate in Super Yacht hardware and include not only a comprehensive range of deck fillers, hatch handles, latches and cleats, but also a range of unique Helicopter Tie-Downs which were developed from a military requirement for securing helicopters on warships at sea!
Hepworth attended Railtex 2015, held at the NEC, Birmingham on 12-14 May 2015. As the UK's leading rail event covering railway equipment, systems and services, Railtex is the industry's meeting place - where visitors and exhibitors come together to see the latest technology in action, learn about new products/services, hear about key industry projects and do business.
Hepworth was awarded Best Newcomer to Railtex and, in addition to the engraved glass trophy that was presented to Ian Lockett and Tim Bell by Roy Walker, Guest presenter for Railtex, Hepworth was given membership to Rail Alliance for the next 12 months.
Alastair Timmis, Rail Account Manager stated: “Railtex was an extremely successful show bringing in many new enquiries superceding our initial expectations of the show. Following a growing global trend, a large number of the enquiries were for our Electrical Wiper System to replace ageing Pneumatic Wiper Systems.”
For further details on the pneumatic wiper systems, please see click here, or please feel free to contact Ian Lockett, Rail Aftersales Manager Tel: 0044 (0)1527 61243
Three Queens salute Liverpool after 175 years
All three Cunard flagships have close to 100 Hepworth wiper systems and controls.
Queen Mary 2, Queen Victoria and Queen Elizabeth met in the Mersey in Liverpool on May 25th 2015, for a gathering in front of the Three Graces and thousands of people on the riverside.
Liverpool is a city that has been Cunard’s home from the beginning in 1840, until 1967. When Queen Mary 2 arrived on 24 May, she hosted a Champagne reception and lunch. On 25 May all three Queens reunited in Liverpool for the first time in history. Sailing in formation and meeting on the famous waterfront of their spiritual home, the fleet performed a water ballet together, creating a spectacular one-off event. Thousands of people viewed the display from the banks of the Mersey, which was later concluded with a brilliant firework display.
Hepworth would like to congratulate Cunard and thank them for the confidence they have in Hepworth’s high performance wiper systems.
Image of three Queens vessels courtesy of Cunard.
Made In The Midlands Exhibition
The exhibition was the biggest in the Made in the Midlands history and demonstrates the growth and confidence in the Midlands industrial community.
Hepworth International exhibited examples of their stainless steel and aluminium fabrications, precision castings and assemblies at last week’s Expo. Also on show were marine and rail wiper components, and electrical controllers together with automotive exterior trims, all manufactured in Hepworth’s Redditch factory.
Sales Director, Peter Turnock commented – “It was an extremely rewarding day, with numerous sales enquiries and new potential clients trying to source a total service of design engineering in custom-made, precision fabrications”
Hepworth Group are now members of SMMT.
The Society of Motor Manufacturers and Traders (SMMT) exists to support and promote the interests of the UK automotive industry at home and abroad.
Working closely with member companies, SMMT acts as the voice of the motor industry, promoting its position to government, stakeholders and the media. Enabling the UK motor industry to fulfil its potential, SMMT addresses the major issues that impact on the automotive sector.
As we already supply our products to the Commercial Vehicle and Automotive industries as a Tier 1 & 2 supplier, Hepworth are planning to expand their product range for both the OEM’s and after-market areas.
Hepworth strengthens its Sales & Marketing Team
Peter Turnock has joined B Hepworth & Co Ltd. as Sales Director with his main responsibility being the growth of Fabrications within the Marine industry, Specialised Marine and new product developments.
Peter brings with him a wide range of experiences and expertise from his varied and wide-ranging background. He helped develop and produce a range of aluminium workboats, motor yachts, racing dinghies, also superstructures for the MOD, fishing fleets and offshore operations together with one of the first unsinkable vacuum-formed dinghies that were sold worldwide. Subsequently, Peter was a Director of the British Aluminium Company, European Brand Manager for Dow Corning, based in Brussels, and a Distribution Manager for GE. He went on to introduce and distribute a wide range of silicone and polymer systems to industrial, engineering, artwork and the film industries including many James Bond and Harry Potter films.
For the last seven years, Peter has been MD of CMA Moldform Ltd., steering their rapid growth through the recession to become a major supplier of Rapid Prototype resin mouldings and production as Tier 1 & 2 for the automotive sector, as well as numerous other industries. This operation also included producing the largest CMA casting - a single poured piece of artwork weighing over 3,300kgs!
“I am looking forward to some interesting new challenges”, said Peter. “There are lots of exciting developments in the pipeline to look forward to – watch this space!!”
Inmar Systems is cornering the market!
Our agent in the US, Inmar Systems, has supplied the following Wynn Straight Line Wiper Systems for the vessels detailed below. These heavy duty wiper and control systems are ideal for large ocean-going vessels, or vessels requiring maximum coverage. The Type D has an externally mounted motor, and the Type C has an internally mounted motor. These straight line wipers offer the most advanced design of linear action window wiping systems for marine and other specialist applications.
3x Wynn Type C Straight Line Wipers - Triples
Fitted to the LLC, Lockport, LA, the thirteenth 154 ft Fast Response Cutter (FRC) to the United States Coast Guard.
The FRCs have a flank speed of 28 knots, state of the art command, control, communications and computer technology, and a stern launch system for the vessels 26 foot cutter boat. They are built to a proven, in-service parent craft design based on the Damen Stan Patrol Boat 4708.
14x Wynn Type D Straight Line Wipers and 1000 Series Controllers
Fitted to the $126-million Samish, the second of three 144-car ferries for Washington State Ferries (WSF), Seattle, WA. Following two months of sea trials and crew training, the new ferry will begin service on the Anacortes/San Juan Islands route on June 14, just in time for the start of the summer sailing season.
The Olympic Class vessels have a capacity of 144 cars and 1,500 passengers and are 362 ft 3 in long x 83 ft 2 in wide. Main propulsion is by two Electro-Motive Diesel engines developing a total 6,000 hp and giving the vessels a speed of 17 knots.
17x Wynn Type C Straight Line Wipers and 3000 Series Controllers
Fitted to U.S. Coast Guard National Security Cutter (NSC), Joshua James (WMSL 754) for Huntington Ingalls Industries.
Ingalls has delivered four NSCs and has three more, including James, under construction. A construction contract was just awarded for an eighth NSC last week.
National Security Cutters, the flagships of the Coast Guard's cutter fleet, are designed to replace the 378 foot Hamilton-class high-endurance cutters, which entered service during the 1960s. NSCs are 418 feet long with a 54-foot beam and displace 4,500 tons with a full load. They have a top speed of 28 knots, a range of 12,000 miles, an endurance of 60 days and a crew of 120.
The Legend-class NSC is capable of meeting all maritime security mission needs required of the high-endurance cutter. It is the largest and most technologically advanced class of cutter in the Coast Guard, with robust capabilities for maritime homeland security, law enforcement, marine safety, environmental protection and national defense missions.
3x Wynn Type D Straight Line Wipers and 1000 Series Controllers
Fitted to Harvey Energy, a special Offshore Supply Vessel (OSV), delivered to Shell for its deepwater operations in the Gulf of Mexico.
The vessel is chartered from Harvey Gulf International Marine and is the first of its kind in the region to run on both liquefied natural gas (LNG) and diesel. Built by the Gulf Coast Shipyard in Mississippi to meet requirements of the ABS “ENVIRO+, Green Passport” notation, the vessel is 302 feet long, will run on 99% LNG fuel and will be able to operate for around seven days before refueling. Shell said two more LNG-fuelled vessels are expected to follow.
14x Wynn Type D Straight Line Wipers with 14x 1000 Series Controllers.
Fitted by Foss Maritime to new fireboat for Port of Long Beach.
The Fireboat 20 is the first of two from Foss scheduled for delivery to the port in the next year, designed by Robert Allan Ltd. of Vancouver, British Columbia.
The first of two new technologically advanced fireboats under construction by Foss Maritime for the Port of Long Beach (POLB), is being readied for service and is scheduled for delivery to Long Beach, California this summer. Fireboat 20 has a Voith Schneider cycloidal propulsion system that allows for exceptional maneuverability, a firefighting system with a pumping capacity of 41,000 gallons per minute, and seven Caterpillar engines. It is designed to be a state-of-the-art command center, with a CBRN system that protects the firefighters from chemical, biological, radiological and nuclear threats. A second fireboat for the POLB is under construction and will be delivered in late 2014 or early 2015.
Hepworth Rail Road Trip taking the the USA and Canada by storm!
Hepworth Rail are currently out in the USA and Canada visiting our clients, suppliers and prospective customers, and forging and cementing relationships in order to further develop our business prospects.
Alastair Timmis, Rail Account Manager and Ian Lockett, Rail Aftersales Manager have been to Seattle, Sacramento and Los Angeles via San Francisco, and then headed off to Ontario, Canada before working their way back down the East coast to Delaware, just south of New York before flying home. Alastair said: "It has been a very valuable and successful trip with the Rail team obtaining many new enquiries and orders. It was a beneficial experience for both the company and customers by paying them a personal visit, where we were able to talk about our products and services face to face. In this age of the internet, emails and mobile phones it is all too easy to lose the personal approach and being able to build working relationships with the very people we are supporting. I think that our continuing road trips are proving that we cannot, as a company, forget this very important aspect of our customer service."
Marine news update...
March was another busy month for the Marine sales team with
exhibitions in Dubai, Istanbul and Vietnam, plus a visit from our Norwegian agent Servi.
Hepworth attended the Dubai Boat Show with our agent Brook Marine, who had built a big stand with working wiper displays on either end. Venu Kayyil and his team were, as ever, extremely helpful and the show itself was a real eye opener. Mainly aimed at yachts and their equipment, there were some incredibly expensive toys on show; a different area of the industry for us, as Hepworth are usually found exhibiting at offshore shows.
At the Istanbul exhibition we joined Mete Tarihmen and his team from Nemo Marine, our marine agent for Turkey. The exhibition was relatively quiet, however we will be making a return visit in May to visit previous, current and potential customers. Vietnam is one of the rising stars of shipbuilding, having recently become the 5th largest in the world by tonnage build (in 2010 they were 11th). The Inmex Vietnam exhibition was small in size but big in potential and there have already been a number of enquiries with more to follow, after many enthusiastic replies.
There were even surprise visits from Eugene Wee from Noah, and Aaron Smith and Samuel Huy from A.M.I, our agent in Australia. Servi visited us to showcase some of their own products in the hope of gaining our approval on further collaboration, which could have big consequences and increase our competitiveness considerably. Hepworth was happy to welcome them all and look forward to seeing them again, June 2 - 5 in Oslo for Norway's Norshipping exhibition.
Rail news update...
The Rail Division has recently secured a contract for the Canadian Kingston & Vancouver new build train projects, 40 sets to be built and shipped to Millhaven in Canada beginning in May 2015.
Interview with CEO Jonathan Eddy in Shipping & Marine magazine
Shipping & Marine magazine recently published a Company Profile of B Hepworth & Co Ltd after
a long and interesting interview with Jonathan Eddy, the Company's CEO.
In the article, Mr Eddy talks about how the company first started as a Yorkshire based manufacturer of chemicals for the local carpet industry before diversifying into the Rail and Marine markets to become the global market leader in the design and manufacture of windscreen wiping systems.
Jonathan finishes off by saying: “Since 2010 we have been manufacturing our products in two to three weeks, but we aim to half this to five to ten days in the future, which will mean our customers won’t have to order in advance and will make us more efficient. Meanwhile, over the next three to five years, it is our goal to reach up to £30 million in turnover; this will be reached through both organic and acquisitional growth.”
Hepworth Wipers fitted onto new P&O 'super liner' Britannia
On the 10th March 2015, the Queen officially named the new cruise "superliner" Britannia. Large crowds attended the naming ceremony which started at midday; the vessel is the fifth cruise ship Her Majesty has officially named. Britannia bears the same name as the Queen's former Royal Yacht Britannia, which was decommissioned in 1997 after more than 50 years of service.
The 3,600-passenger vessel, featuring B Hepworth's Type C’s wipers systems with 6000 Series controllers, is the largest cruise ship designed for the British holiday market, according to operator P&O.
The Britannia's home port will be Southampton for the summer months after being built in Italy at a cost of almost half a billion pounds sterling; she will sail from Southampton during the summer and from the Caribbean in the winter.
The 141,000-tonne ship can hold up to 3,600 passengers and 1,500 crew, and features a 94m (308ft) union jack on its bow. There are 15 passenger decks, 13 places to eat and 13 bars, four swimming pools and nine places to enjoy the entertainment and, at 330m (1,082ft), the ship is longer than the Shard is tall!
Britannia will make its maiden voyage to Spain, Italy and France on 14 March.
Click here for further information. Image courtesy of BBC News Hampshire and Isle of Wight
Kinetic Light Sculpture
Hepworth's Fabrication division machined all the copper metal work for this amazing Kinetic Light Sculpture by Hugo Light Design who are located in London.
For more information please click here.
Ariel Nomad is wipered-out!
Ariel's stunning new Nomad all-terrain car made its debut at the Autosport International show in Birmingham in January and will offer a completely different type of all-terrain high performance driving when it is released for sale in the summer.
The Ariel Nomad, recently featured on BBC 1's Top Gear programme, is able to reach 60mph in a blistering 3.4 seconds; with a top speed of 125mph, the car is powered by a 2.4 litre Honda engine that has been configured with Ariel electronics, with an end result of 235bhp at 7200rpm.
With this being such a unique vehicle aesthetically, and its sister car the Ariel Atom being an iconic sports car, B Hepworth and Co Ltd, a Midlands-based manufacturer of high performance bespoke windscreen wiper systems was excited to have the opportunity to work with Ariel to develop the Nomad's wiper system. The project began in 2012; dual pendulum wrap-over wipers and wiper arms with a 50Nm motor were used, but there were some complex challenges for their design team to overcome, most notably packaging the system around the structure of the vehicle.
Martyn Groves of B Hepworth commented "Our expertise in developing and building bespoke, high quality wiper systems, whilst simultaneously being a UK manufacturer meant that we were the ideal choice. With Ariel being a well-known name amongst petrol head and sports-car enthusiasts worldwide it was an exciting project to be involved in and a perfect way to show our flexibility to design bespoke wiper systems".
Ariel Director Simon Saunders thinks that the Nomad will be bought mainly for recreational driving, both on and off-road, but also feels that the car could compete "with honour" in the Dakar Rally. The Nomad has been tested on well known WRC stages, winch challenge courses and closed forest roads and so far the Nomad has shown excellent levels of performance, adding up to a whole new kind of driving fun!